RTSP Camera URLs
Find your camera brand’s RTSP address, local login requirements, and stream options to bring home camera feeds into Chirp Lens.
To show your camera in Lens, Twin needs the address of its video feed. This RTSP URL tells Twin where the camera is, how to sign in, and which picture to request. You can usually build it from a short pattern instead of searching for a completely different setup for every camera.
This camera-brand directory collects common addresses and the settings needed to adapt them. Available streams depend on your particular model and firmware. A camera that works only through its manufacturer's cloud app may not provide a local RTSP feed.
What do I replace in an RTSP URL?
A typical address looks like this:
rtsp://username:password@cameraip:554/stream1Use your camera's local username and password in place of the first two placeholders. Replace cameraip with the camera's local network address. 554 is the usual RTSP port; use another number if your camera's settings specify one. The ending, such as /stream1, chooses a stream.
Your camera password, Twin sign-in password, and Lens connection token have different jobs. Only the camera's credentials belong in its RTSP address.
How do I look up my camera brand?
Start with Tapo, HiLook / Hikvision, or Dahua, Reolink, and Axis. The extended directory includes Amcrest, Avigilon, Bosch, EZVIZ, Foscam, Hanwha / Wisenet, i-PRO, VIGI, Uniview, and VIVOTEK.
What is the Tapo RTSP URL?
These are the addresses for the main picture and the lower-quality alternative on compatible Tapo models:
rtsp://username:password@cameraip:554/stream1
rtsp://username:password@cameraip:554/stream2The Tapo camera in our Lens example uses /stream1. Before connecting yours, open the Tapo app, select the camera, and go to Device Settings → Advanced Settings → Camera Account. Set up that local account and use it in the URL; your TP-Link cloud login is different.
Check RTSP support before choosing a battery camera, because many battery-powered models do not offer it. Certain dual-lens models also have /stream6 and /stream7 for their other lens. TP-Link's setup instructions explain the model differences.
What is the HiLook and Hikvision RTSP URL?
Our connected HiLook camera uses this substream address pattern:
For the main stream, use:
Here, 1 identifies the camera channel, while 01 and 02 select main and substream. A standalone camera generally uses channel 1. With a recorder, channel 2 becomes 201 for main or 202 for substream. This matches Hikvision's published stream examples. Keep the path's capitalization and use the RTSP port configured on your device.
What are other common RTSP URL patterns?
Use these when your camera supports the corresponding manufacturer's RTSP interface. Replace the placeholders before entering the address in Twin.
Dahua
rtsp://username:password@cameraip:554/cam/realmonitor?channel=1&subtype=0
Change subtype=0 to subtype=1.
Reolink
rtsp://username:password@cameraip:554/Preview_01_main
Change main to sub.
Axis
rtsp://username:password@cameraip:554/axis-media/media.amp
Choose the camera's stream profile or video parameters.
For Dahua, channel=1 chooses the first channel and subtype chooses its stream. See Dahua's URL examples.
Reolink uses 01 for a standalone camera; an NVR can use another channel, such as 02. Enable RTSP on supported devices as described in Reolink's guide.
Axis can select another video channel with a parameter such as ?camera=2. Its streaming instructions explain that endpoint.
What are RTSP URLs for more camera brands?
If you already have one of these cameras at home, check its RTSP settings before replacing it. The links explain the manufacturer’s stream format; the entry does not mean that every model in the range has been tested with Lens.
Amcrest
For an IP camera, start with subtype=0; an extra stream uses 1. An Amcrest recorder can need /h264Preview_01_main instead.
Avigilon
Copy your camera’s RTSP Stream URI from Compression and Image Rate. The example shows a primary unicast stream.
Bosch
On Bosch BVIP equipment, change inst=1 to inst=2 for the second encoding stream.
EZVIZ
EZVIZ documents this for C6N, TY1, and TY2. Use the local camera password described below.
Foscam
A lighter picture uses /videoSub. Port 88 is common for Foscam; your model may use another port.
Hanwha Vision and Wisenet
Replace N with an existing video profile number from your camera’s settings.
i-PRO
Use stream_2 for another configured stream. Older models can use the H.264-specific path /Src/MediaInput/h264/stream_1.
TP-Link VIGI
Choose /stream2 for the lower-quality feed; sign in with the VIGI camera account.
Uniview and UNV
The usual substream is /media/video2; some models also provide /media/video3.
VIVOTEK
Older access names include /live.sdp and /live2.sdp. Newer cameras may use a profile address instead.
For EZVIZ, cameraPassword means the local connectivity password. On the models in the linked example, this initially corresponds to the verification code on the device label. After a password change, use the new local/video encryption password. EZVIZ explains the shared password setting.
For VIVOTEK cameras using newer stream profiles, the address can instead be:
Get profileToken from the camera’s video profile settings. It is a camera profile identifier, not your private Lens connection token. Firmware can also expose names of the form /live1sN.sdp; copy the actual access name for your chosen stream. VIVOTEK’s newer-firmware guide covers these differences.
How do I add the RTSP address and check the picture?
In Twin, open Settings → Camera Connector and enter the complete address in the stream URL field. If your camera supplies a substream, enter that in the separate substream field. Save the settings, then confirm that video arrives before continuing with camera pairing.
The main stream usually gives you more detail; the substream uses fewer resources. Actual resolution comes from the camera's video settings. Start with a working feed, then choose the quality that suits your home connection and Twin host.
If no picture appears, check that RTSP is enabled, the local camera account is correct, and the Twin host can reach the camera's address and port. When the camera sits behind a recorder, the URL may need the recorder's address, account, and channel instead.
A URL containing your camera password should stay private. Your camera and Twin communicate on the local network, so you do not need to publish the camera's RTSP port on the internet for Lens. Continue with connection troubleshooting if the feed still fails.
Last updated